Ivory Coast

Anegre has a lustrous sheen, an even texture, and grain that is typically straight, but may be interlocked, wavy, or marked with a wide range of beautiful shimmering figures. Sought after for its light creamy color, large logs, uniformity across flitches, and unobtrusive grain markings, anegre takes stain readily and is often dyed to resemble cherry, walnut, or other woods.

Avodire is a pale yellow African wood with a natural luster, moderate to fine texture, and very little contrast between heartwood and sapwood. A wide range of grain patterns and figures, combined with a shimmery chotoyance (cat’s eye effect), make it popular in cabinetry, furniture, and architectural interiors. Highly figured logs fetch high prices.

In both color and aroma, bosse resembles cedar and for that reason this large West African tree is sometimes called African cedar. The color varies from pale pink to deep mahogany and veneer is often highly figured with fiddleback, mottle, or a highly prized pommele figure—all of which ensure one-of-a-kind architectural installations. Availability and cost can vary widely based on grain patterning and intensity.

While most etimoe trees are tapped for rubber, untapped trees are often sliced to produce this rare and striking veneer. The light red-brown to grey-brown wood has a straight grain, often with striking black-red veins or stripes, and a fine, even, lustrous texture. Etimoe is available in large sizes and in a variety of figures, most commonly curly and fiddleback. 

The wood is yellowish-white to cream in color and becomes yellowish-grey when steamed. Sliced veneers are used for door skins and inner surface veneers. Rotary veneer is used for plywood panels and bleaching + dying.

Although veneer is often labeled white or black limba, there is really just one limba tree. Black limba refers veneer selected from the darker heartwood of the tree—typically reddish brown with varying degrees of irregular black streaking—and is somewhat more rare than white limba, which is cut from the lighter sapwood of the same tree. Figured wood is highly prized for architectural use. 

Equally apt in contemporary, global, and traditional settings, mahogany has been traded from African ports for hundreds of years. Typically red to red-brown, and darker than South American mahoganies, this specie often develops a plain to ropey stripe, and may be marked with highly decorative cross figuring. Crotch veneers with vivid, flame-like patterns are one of nature’s most beautiful works of art.

Also called African cherry, makore shares the light pink to deep red coloring, dark growth lines, and small pores common to cherry. In architectural installations it has the added benefit of availability in large sizes not found in American cherry. Cut on the quarter, makore shows a contrasting stripe that may be plain or crossed with a variety of decorative figures. Flat cut, it bears the distinctive cathedral grain pattern. 

Sapele varies in color from log to log, but is generally medium to dark red-brown. Finishing brings out an intense depth of color and highlights its natural luster, which is similar to mahogany. This veneer has a fine grain, a distinct and desirable stripe formation, and often carries a lively figure. Flat cut sapele shows the characteristic heart or cathedral grain The highly prized pommele sapele is intensely marked with a swirly grain and randomly interspersed blisters, or pommele markings. A high degree of luster gives sapele a three-dimensional effect. 

This African species is easily recognized by its exotic, tiger-like look—deep reddish-orange with dark stripes that vary from fine lines to heavy, pronounced swatches. Like mahoganies, tigerwood has a lustrous surface, good yields, and is highly adaptable for furniture, cabinetwork, and matched architectural paneling.