Often called African teak, afrormosia grows in relatively dry forests in the Congo basin of west Africa. Typically available in larger leaves than teak, it has a beautiful golden brown color; a fine, uniform texture; natural luster; and a typically straight grain that may produce a broken stripe when quarter cut. This veneer can be stained to a variety of colors and is a popular choice for architectural and boat interiors.
Plain Stripe
Anegre has a lustrous sheen, an even texture, and grain that is typically straight, but may be interlocked, wavy, or marked with a wide range of beautiful shimmering figures. Sought after for its light creamy color, large logs, uniformity across flitches, and unobtrusive grain markings, anegre takes stain readily and is often dyed to resemble cherry, walnut, or other woods.
Reconstituted Veneer is rotary cut veneer created from fast-growing secondary species, then dyed, layered, laminated, and laid up with grain that replicates a natural species. It offers outstanding consistency in color and grain. The pattern for Argento was previously owned by an exotic car manufacturer for vehicle interiors and is a one-of-a-kind offering that won’t be produced in the future. This recon veneer is dark graphite-like in color. It is available in 9-foot lengths.
Ancient Norwegians considered a mythological ash tree to be the center of the world. Among the palest colored veneers, ash has a lustrous surface, beautiful straight grain, a light stripe effect, and subtle contrast between its light tan heartwood and creamy sapwood. It produces a wide range of beautiful, shimmering figures and delicate burls. Extremely strong, ash is the lumber of choice for parallel bars, baseball bats and tool handles. In veneer, it’s prized for high quality furniture and for use in light, open interiors.
Olive ash is not a specie in itself, rather it’s the name given to veneer cut from the dark heartwood of one of several European ashes. The dark on light stripes are reminiscent of true olive wood. Colors range from white to yellow to brown in varied combinations of color and markings. Grain may be straight, curly, or wavy. Olive ash burl veneer is highly prized for its turbulent markings and striking color contrasts.
Considered among the best veneers in the poplar family, aspen ranges in color from almost pure white to light straw to warm tan. Favored logs produce a lovely, bright veneer with a beautiful, natural sheen. Aspen is often fumed to a rich, dark brown for use in modern environments. It mixes beautifully with stone and other materials in natural environments.
A favorite in modern interiors, beech is a straight grained wood with a very fine, even texture. While beech is naturally a creamy, almost white color, most beech is steamed, producing a consistent slightly pink hue in veneer. Flat cut veneers present a nice cathedral; quartered veneers carry a silvery fleck pattern. This specie produces a number of beautiful figures prized for interior architecture.
Thousands of centuries ago, Lebanese cedar was one of the world’s most precious woods, used in the construction of ancient temples and palaces. Today, this beautiful, decorative wood is now primarily grown in England and France. Rare and highly prized, most logs are produced by local European veneer merchants with local knowledge of the availability of this exceptional veneer.
Also known as juniper, the aromatic red cedar veneer tends to be a reddish or violet-brown with a pale yellow sapwood. A relatively small tree, the veneer produced typically includes copious knot marks. Red cedar stands are found in scattered locations over the eastern half of North America and their veneer is well suited to naturalistic and rustic interiors.
Brought to Europe by invading Romans, chestnut loves the warmth and so it’s apt that it’s commonly found in the wine-growing regions across Europe and Asia. The veneer is yellow to dark brown with a strong grain pattern similar to oak, elm, or ash. The grain is straight with a somewhat coarse texture. European chestnut accepts stain readily and finishes easily.
Dillenia is a canopy tree that grows over 100’ tall in the Malaysian archipelago—with straight, branch-free, trunks of 80’ and more, and buttresses up to 12’ high. The heartwood is a rich reddish-brown with an occasional purple tinge. The sapwood is wide, orange-brown to pink, and subtly defined. Conspicuous medullary rays give this wood a lacy and lustrous surface in quarter cut veneer.
Grey Elm has a subtle yet lively interlocked grain with a somewhat coarse and uneven texture. The hue of sapwood is nearly white making it highly distinguishable from the heartwood, which ranges from grey to light brown with occasional tinges of reddish brown. It is most commonly found in the Eastern to Midwestern parts of the United States.
Red elm has a lively, decorative grain and a pale reddish-brown color interspersed with lovely light effects that result from wood’s medullary rays. Found primarily around the Great Lakes region, (and commonly referred to as slippery elm in tree form) this elegant domestic is a hardy survivor of the Dutch elm disease that wiped out millions of elms worldwide.
While most etimoe trees are tapped for rubber, untapped trees are often sliced to produce this rare and striking veneer. The light red-brown to grey-brown wood has a straight grain, often with striking black-red veins or stripes, and a fine, even, lustrous texture. Etimoe is available in large sizes and in a variety of figures, most commonly curly and fiddleback.
Eucalyptus is a lively veneer prized for the exotic, shimmering ripple effect in its grain. It’s available in a wide range of colors in its natural state—as well as a rich chocolate-brown when fumed, replicating the look of rich African or tropical woods. Eucalyptus produces a range of outstanding figures—most notably a strong fiddleback or bee’s wing figure—and stunning burls that are typically larger than most burls, producing well-sized sheets of rotary cut veneer. Also available in rough cut.
The rustic character of this wood works well in both contemporary and arcadian settings. The vivid, contrasting red-yellow stripe is typically straight, even, and seldom, if ever, figured. Generally quarter cut, more veneer and production plywood are made from this specie than any other worldwide.
The largest of the hemlocks, this hemlock grows over 300’ tall from the Rockies to the Pacific coast. It has a straight grain, tightly spaced growth rings, somewhat course texture, and flat, uniform appearance with little distinction between the heartwood and sapwood. Hemlock takes finishing well and can be stained in virtually any color, making it an adaptable wood for interior projects.
While most hickory is cut for lumber due to its strength and density, this traditional domestic beauty is increasingly available in veneer. Hickory has a notable contrast between its reddish heartwood and lighter sapwood. The grain is usually straight, but can be wavy or irregular in some flitches. Texture is course and porous with a matte finish. This is a quintessential domestic wood—lively in appearance and rich in American woodworking tradition.
One of the hardest woods in the world, ipé is found throughout Central and South America, although most commercial wood comes from Brazil. White the tree itself is large, defect-free sections for veneer are relatively small. Extremely dark, the colors can vary from reddish-brown to green-black with subtle but distinctive stripes. Flat cut veneer produces the characteristic cathedral grain. Quartered, it can produce a plain or broken stripe figure.
This tropical evergreen grows to impressive heights in consistently cylindrical trunks, making it ideal for veneer production for architectural use. It has an intense, warm, reddish-brown color—much like cherry—with contrasting occasional gray-brown streaks. Jatoba has a medium texture, interlocked grain, and very desirable natural luster.
A relative newcomer to the US market, jequitiba has grown in popularity in the last decade as an alternative to mahogany for rich, traditional interiors. The reddish to purple-brown heartwood, sometimes with dark streaks, varies only subtly from its paler sapwood. It has a medium luster, fine grain, and soft, smooth texture. These large trees produce ample size leaves for large installations. Flat cut, it has a pleasing cathedral figure; quartered wood may be figured.
Reconstituted Veneer is rotary cut veneer created from fast-growing secondary species, then dyed, layered, laminated, and laid up with grain that replicates a natural species. It offers outstanding consistency in color and grain. The pattern for Kalahari was previously owned by an exotic car manufacturer for vehicle interiors and is a one-of-a-kind offering that won’t be produced in the future. This recon veneer is in the grey color range, somewhat resembling Walnut and can be stained. It is available in 9-foot lengths.
The wood is yellowish-white to cream in color and becomes yellowish-grey when steamed. Sliced veneers are used for door skins and inner surface veneers. Rotary veneer is used for plywood panels and bleaching + dying.
Larch is an exceptionally straight-grained veneer with a reddish-brown heartwood and thin, yellow-white sapwood. This tall, straight tree grows to exceptional heights, producing long lengths of clear veneer, primarily from the heartwood of the tree. Fumed, the typically medium colored wood turns a rich, dark, chocolate brown color reminiscent of African or tropical woods.
Equally apt in contemporary, global, and traditional settings, mahogany has been traded from African ports for hundreds of years. Typically red to red-brown, and darker than South American mahoganies, this specie often develops a plain to ropey stripe, and may be marked with highly decorative cross figuring. Crotch veneers with vivid, flame-like patterns are one of nature’s most beautiful works of art.