Anegre has a lustrous sheen, an even texture, and grain that is typically straight, but may be interlocked, wavy, or marked with a wide range of beautiful shimmering figures. Sought after for its light creamy color, large logs, uniformity across flitches, and unobtrusive grain markings, anegre takes stain readily and is often dyed to resemble cherry, walnut, or other woods.
High Available Stocked
Ancient Norwegians considered a mythological ash tree to be the center of the world. Among the palest colored veneers, ash has a lustrous surface, beautiful straight grain, a light stripe effect, and subtle contrast between its light tan heartwood and creamy sapwood. It produces a wide range of beautiful, shimmering figures and delicate burls. Extremely strong, ash is the lumber of choice for parallel bars, baseball bats and tool handles. In veneer, it’s prized for high quality furniture and for use in light, open interiors.
Olive ash is not a specie in itself, rather it’s the name given to veneer cut from the dark heartwood of one of several European ashes. The dark on light stripes are reminiscent of true olive wood. Colors range from white to yellow to brown in varied combinations of color and markings. Grain may be straight, curly, or wavy. Olive ash burl veneer is highly prized for its turbulent markings and striking color contrasts.
Bamboo is one of the fastest growing woody plants on earth, reaching hundreds of feet just months after harvesting. This unbridled regeneration makes bamboo a natural, renewable choice for architectural veneer. Colors range from creamy-yellow to warm amber; the grain is straight with distinctive knot-like markings characteristic of the species. Available in light or dark offerings with narrow or wide stripe patterns.
A favorite in modern interiors, beech is a straight grained wood with a very fine, even texture. While beech is naturally a creamy, almost white color, most beech is steamed, producing a consistent slightly pink hue in veneer. Flat cut veneers present a nice cathedral; quartered veneers carry a silvery fleck pattern. This specie produces a number of beautiful figures prized for interior architecture.
American cherry is a timeless and elegant veneer that has a satiny finish and fine, lustrous grain marked with natural pitch flecks and small gum pockets. Typically darker than European cherry, the veneer can vary widely in color from pale pink to reddish brown. Flat cut, it produces a beautiful cathedral pattern. Figured, it exhibits a fine fiddleback or rope figure.
Grey Elm has a subtle yet lively interlocked grain with a somewhat coarse and uneven texture. The hue of sapwood is nearly white making it highly distinguishable from the heartwood, which ranges from grey to light brown with occasional tinges of reddish brown. It is most commonly found in the Eastern to Midwestern parts of the United States.
Eucalyptus is a lively veneer prized for the exotic, shimmering ripple effect in its grain. It’s available in a wide range of colors in its natural state—as well as a rich chocolate-brown when fumed, replicating the look of rich African or tropical woods. Eucalyptus produces a range of outstanding figures—most notably a strong fiddleback or bee’s wing figure—and stunning burls that are typically larger than most burls, producing well-sized sheets of rotary cut veneer. Also available in rough cut.
This domestic tree, common to the southern US states, is highly prized for its beautiful, erratic grain, fine texture, contrasty colors, and beautiful silky luster. Large logs create excellent opportunities to use this beautiful domestic in large-scale projects.
While most hickory is cut for lumber due to its strength and density, this traditional domestic beauty is increasingly available in veneer. Hickory has a notable contrast between its reddish heartwood and lighter sapwood. The grain is usually straight, but can be wavy or irregular in some flitches. Texture is course and porous with a matte finish. This is a quintessential domestic wood—lively in appearance and rich in American woodworking tradition.
Kevazinga is the name given to Bubinga veneer that has been rotary cut to capitalize on its eccentric grain patterns. This exceptional veneer is red-brown in color; with dark veining, a coarse texture, and a lively, swirly grain interspersed with “peanut” or pommele markings. Highly sought after for high-end cabinetry and architectural use.
Larch is an exceptionally straight-grained veneer with a reddish-brown heartwood and thin, yellow-white sapwood. This tall, straight tree grows to exceptional heights, producing long lengths of clear veneer, primarily from the heartwood of the tree. Fumed, the typically medium colored wood turns a rich, dark, chocolate brown color reminiscent of African or tropical woods.
Equally apt in contemporary, global, and traditional settings, mahogany has been traded from African ports for hundreds of years. Typically red to red-brown, and darker than South American mahoganies, this specie often develops a plain to ropey stripe, and may be marked with highly decorative cross figuring. Crotch veneers with vivid, flame-like patterns are one of nature’s most beautiful works of art.
Also called African cherry, makore shares the light pink to deep red coloring, dark growth lines, and small pores common to cherry. In architectural installations it has the added benefit of availability in large sizes not found in American cherry. Cut on the quarter, makore shows a contrasting stripe that may be plain or crossed with a variety of decorative figures. Flat cut, it bears the distinctive cathedral grain pattern.
From the same tree that produces maple syrup, comes this beautiful veneer that ranges in color from snow white to warm yellow; has a close, fine luminous texture; and a lovely straight grain that may be interspersed with natural character marks. A wide range of gorgeous figures and wild grain distortions—from curly to bird’s eye to maple burl—are sought after for distinctive paneling and furniture. Flat cut maple displays the distinctive heart or cathedral pattern.
In folklore, white oak is a symbol of strength and longevity. This domestic standard is a bit smaller in diameter than European oak and ranges in color from biscuit to golden brown to somewhat gray. It has the distinctive grain pattern and abundant angular pores that produce a wonderful flake pattern in quarter and flat cut veneers. Rift cut, the veneer produces a straight, combed grain with minimal flake. Fumed, the wood turns a warm dark brown reminiscent of Arts & Crafts-style furniture. Rustic options have rich character marks and grain variations for a truly rustic look (intended for random matched sequences). Also available in recon and rough cut.
One of the most common trees in European forests, this oak has long been associated with the mythological gods due to its immense size, strength, and longevity. Like most oaks, the grain is straight with broad rays that produce a lively flake effect in flat or quarter cut wood and straight combed grain in rift cut. The golden-brown wood is slightly darker than American white oak, and slightly lighter than English brown oak. Fumed veneer produces a rich chocolate-brown color similar to tropical and African woods. CoCo (color-imbued) options are available in several shades of gray and brown. Vintage oak is sliced from the hand-hewn beams of reclaimed wood from old barns and farmhouses across Europe; this rustic looking veneer is intended for use in random matched sequences.
Sapele varies in color from log to log, but is generally medium to dark red-brown. Finishing brings out an intense depth of color and highlights its natural luster, which is similar to mahogany. This veneer has a fine grain, a distinct and desirable stripe formation, and often carries a lively figure. Flat cut sapele shows the characteristic heart or cathedral grain The highly prized pommele sapele is intensely marked with a swirly grain and randomly interspersed blisters, or pommele markings. A high degree of luster gives sapele a three-dimensional effect.
Actually a maple by genus, sycamore is among the most valuable native broad-leafed trees in Europe. Nearly white in color with a fine, close texture, notable uniform structure, and straight grain that may be figured, this light color wood evokes a minimalist elegance. Flat cut veneer shows the characteristic cathedral pattern. It readily accepts stains and can be dyed to many colors, most popularly a silver gray.
American walnut is the quintessential native hardwood and a hallmark of wood quality and tradition—one of the country’s most versatile, varied, and well-loved veneers. It produces a wider variety of figures than any other wood. Quarter cut veneers have a straight, even grain; flat cut produces a beautiful cathedral pattern. Burled walnut is a rare and exceptional offering—rich and dark with a beautiful swirling grain intermingled with clusters of burl. Also available in recon and rough cut.