Millwork

Often called African teak, afrormosia grows in relatively dry forests in the Congo basin of west Africa. Typically available in larger leaves than teak, it has a beautiful golden brown color; a fine, uniform texture; natural luster; and a typically straight grain that may produce a broken stripe when quarter cut. This veneer can be stained to a variety of colors and is a popular choice for architectural and boat interiors. 

Alder is a warm honey-red colored wood with a beautiful, subtle grain interspersed with fine lines and flecks produced by the tree’s annual growth rings. Domestic alder grows in a mile mile wide coastal strip along the Pacific coast from Canada almost to Mexico; European alder along.  The wood darkens to a warm reddish-brown color after being felled. Natural markings including pithy flecks and streaks add to the singular character to this wood. 

Amboyna burl is among the world’s rarest and most expensive veneers—holding the distinction of being the original wood used on Rolls Royce dashboards. Leafs are small in dimension due to the small size of the burl. Deep yellow-orange to red, amboina burl has an unsurpassed depth and beauty prized in high quality architectural woodwork and cabinetry.

Anegre has a lustrous sheen, an even texture, and grain that is typically straight, but may be interlocked, wavy, or marked with a wide range of beautiful shimmering figures. Sought after for its light creamy color, large logs, uniformity across flitches, and unobtrusive grain markings, anegre takes stain readily and is often dyed to resemble cherry, walnut, or other woods.

Reconstituted Veneer is rotary cut veneer created from fast-growing secondary species, then dyed, layered, laminated, and laid up with grain that replicates a natural species. It offers outstanding consistency in color and grain. The pattern for Argento was previously owned by an exotic car manufacturer for vehicle interiors and is a one-of-a-kind offering that won’t be produced in the future. This recon veneer is dark graphite-like in color. It is available in 9-foot lengths.

ASH

Ancient Norwegians considered a mythological ash tree to be the center of the world. Among the palest colored veneers, ash has a lustrous surface, beautiful straight grain, a light stripe effect, and subtle contrast between its light tan heartwood and creamy sapwood. It produces a wide range of beautiful, shimmering figures and delicate burls. Extremely strong, ash is the lumber of choice for parallel bars, baseball bats and tool handles. In veneer, it’s prized for high quality furniture and for use in light, open interiors.

Olive ash is not a specie in itself, rather it’s the name given to veneer cut from the dark heartwood of one of several European ashes. The dark on light stripes are reminiscent of true olive wood. Colors range from white to yellow to brown in varied combinations of color and markings. Grain may be straight, curly, or wavy. Olive ash burl veneer is highly prized for its turbulent markings and striking color contrasts.

Considered among the best veneers in the poplar family, aspen ranges in color from almost pure white to light straw to warm tan. Favored logs produce a lovely, bright veneer with a beautiful, natural sheen. Aspen is often fumed to a rich, dark brown for use in modern environments. It mixes beautifully with stone and other  materials in  natural environments. 

Avodire is a pale yellow African wood with a natural luster, moderate to fine texture, and very little contrast between heartwood and sapwood. A wide range of grain patterns and figures, combined with a shimmery chotoyance (cat’s eye effect), make it popular in cabinetry, furniture, and architectural interiors. Highly figured logs fetch high prices.

Bamboo is one of the fastest growing woody plants on earth, reaching hundreds of feet just months after harvesting. This unbridled regeneration makes bamboo a natural, renewable choice for architectural veneer. Colors range from creamy-yellow to warm amber; the grain is straight with distinctive knot-like markings characteristic of the species. Available in light or dark offerings with narrow or wide stripe patterns. 

A favorite in modern interiors, beech is a straight grained wood with a very fine, even texture. While beech is naturally a creamy, almost white color, most beech is steamed, producing a consistent slightly pink hue in veneer. Flat cut veneers present a nice cathedral; quartered veneers carry a silvery fleck pattern. This specie produces a number of beautiful figures prized for interior architecture. 

This veneer is cut from burled growths found on birch trees in forests in Finland and Russia—the result of local genetics or the soil conditions in that location. The veneer produced is uncommonly beautiful—an atypical burl pattern interspersed with pitch flecks, a swirling figure, and small, dark “eye” markings that create a teardrop effect. Veneer is rotary cut due to the small diameter of the burl.

Red birch is not actually a specie—but is rather veneer cut from the darker heartwood of the yellow birch tree. Rich reddish-brown in color (the sapwood is almost pure white), this veneer is a fine, versatile, and popular choice in architectural interiors. When figured, it typically presents a curly or mottle figure. Its smooth surface makes it well suited for applying stains and glossy finishes.

Among the whitest veneers, white birch is not actually a species, but is rather the sapwood of the yellow birch tree, selected specifically for its creamy white color. In the 50s, birch veneer was in its heyday—especially in home furniture—and is experiencing resurgence with the renewal of the modern aesthetic. A small tree (33’ on average), white birch produces smaller leaves than most trees. Its smooth surface makes it well suited for applying stains and glossy finishes.

In both color and aroma, bosse resembles cedar and for that reason this large West African tree is sometimes called African cedar. The color varies from pale pink to deep mahogany and veneer is often highly figured with fiddleback, mottle, or a highly prized pommele figure—all of which ensure one-of-a-kind architectural installations. Availability and cost can vary widely based on grain patterning and intensity.

Bubinga is a striking veneer with a very broad color spectrum ranging from pink to brownish-red to nearly violet. It has a beautiful texture and fine contrasting growth lines that may be wavy in some logs due to the grain’s interlocked fibers. Bee’s wing and block mottle figures are fairly common. Behemoth lengths and widths make it well suited for large architectural installations. When rotary cut, bubinga is called kevazinga. This African veneer is a sophisticated and elegant choice for interior environments.

Thousands of centuries ago, Lebanese cedar was one of the world’s most precious woods, used in the construction of ancient temples and palaces. Today, this beautiful, decorative wood is now primarily grown in England and France. Rare and highly prized, most logs are produced by local European veneer merchants with local knowledge of the availability of this exceptional veneer.

Also known as juniper, the aromatic red cedar veneer tends to be a reddish or violet-brown with a pale yellow sapwood. A relatively small tree, the veneer produced typically includes copious knot marks. Red cedar stands are found in scattered locations over the eastern half of North America and their veneer is well suited to naturalistic and rustic interiors.

Cerejiera is a South American wood particularly prized in crotch veneer—a figure that develops when two branches or trunks are knit together as they grow (sometimes called a plume or feather pattern).  The pyramid-like pattern is lively, rich in contrast, and fascinating to behold. This rare veneer is sought after for high-end furniture and as a featured accent in architectural interiors

American cherry is a timeless and elegant veneer that has a satiny finish and fine, lustrous grain marked with natural pitch flecks and small gum pockets. Typically darker than European cherry, the veneer can vary widely in color from pale pink to reddish brown. Flat cut, it produces a beautiful cathedral pattern. Figured, it exhibits a fine fiddleback or rope figure. 

Brought to Europe by invading Romans, chestnut loves the warmth and so it’s apt that it’s commonly found in the wine-growing regions across Europe and Asia. The veneer is yellow to dark brown with a strong grain pattern similar to oak, elm, or ash. The grain is straight with a somewhat coarse texture. European chestnut accepts stain readily and finishes easily.

Dillenia is a canopy tree that grows over 100’ tall in the Malaysian archipelago—with straight, branch-free, trunks of 80’ and more, and buttresses up to 12’ high. The heartwood is a rich reddish-brown with an occasional purple tinge. The sapwood is wide, orange-brown to pink, and subtly defined. Conspicuous medullary rays give this wood a lacy and lustrous surface in quarter cut veneer.

While there are many ebonies, Macassar ebony is the best known and most commercially significant. This dramatic, bold wood is nearly black in color with thin, contrasting yellow-brown stripes and a beautiful sheen. Because the tree is small, veneer is rare, precious and highly sought after for cabinetry and architectural millwork. Also available in recon.

European Elm with cluster figuring features a lively and dynamic grain pattern, as well as a coarse texture. The wood’s color ranges from yellow to tan with a subtle pink undertone. It’s worth noting that the color tones can vary significantly from one log to another. The unique grain and warm color palette creates a timeless and cheerful aesthetic. This particular type of Elm is primarily found in Eastern Europe, France, and northeastern and southeastern Finland, and is most commonly known for its exceptional durability and resilience.

Grey Elm has a subtle yet lively interlocked grain with a somewhat coarse and uneven texture. The hue of sapwood is nearly white making it highly distinguishable from the heartwood, which ranges from grey to light brown with occasional tinges of reddish brown. It is most commonly found in the Eastern to Midwestern parts of the United States.

Pages